Commercial Data Center Cooling in Calabasas

As a family‑owned HVAC engineering firm with 80+ years in engineering across four generations, #1 AC Guys delivers mission‑critical cooling for commercial data centers in Calabasas and throughout Southern California. We specialize in large and complex projects where precision, redundancy, and energy efficiency are non‑negotiable. Our work aligns with ASHRAE TC9.9 guidance to protect uptime while reducing total cost of ownership.

Why #1 AC Guys for Calabasas Data Centers

Your workloads demand stability. We combine deep engineering discipline with responsive service to keep your environment within tight temperature and humidity bands — even during peak loads and utility events.

• Fourth‑generation engineering team with 80+ years of expertise
• CRAC/CRAH, in‑row, and perimeter solutions for high‑density racks
• Hot‑aisle/cold‑aisle containment and airflow management
• N+1/N+2 redundancy, concurrent maintainability, and scalable design
• Economizer strategies for lower PUE and energy savings
• 24/7 emergency response and rapid‑deploy temporary cooling
• Integration with BMS/DCIM and smart alerts for proactive maintenance

Our mission is healthy air for a healthy life — and that extends to data center offices, NOCs, and support spaces where people work. While we protect your servers, we also deliver clean, comfortable air for your teams.

Design & Engineering Excellence

Every successful build starts with engineering. We begin with a thorough site assessment, IT load profile, growth roadmap, and risk analysis. We then model airflow and heat rejection paths to eliminate hot spots and maintain predictable performance.

• Load calculations, diversity factors, and redundancy planning
• CFD‑informed layouts and containment strategies
• Equipment selection matched to rack density and tier targets
• Electrical coordination (power/controls) and BMS/DCIM points
• Permitting support and code compliance for Calabasas and LA County

Results are documented with drawings, submittals, commissioning plans, and MOPs/SOPs for clean handoffs. We design for maintainability and lifecycle value — not just first cost.

Installation & Commissioning

Our field teams execute with precision in active facilities. We phase work to minimize downtime, provide temporary cooling where needed, and deliver rigorous testing before go‑live.

• CRAC/CRAH install (DX, chilled water), in‑row/perimeter units
• Containment builds, raised floor tuning, return‑air pathways
• Economizers, heat rejection (dry coolers, towers), and filtration
• Controls integration, alarming, trending, and functional testing
• Integrated systems testing and documented commissioning

Post‑install, we train your staff, provide maintenance schedules, and set up KPIs for thermal performance and energy use.
Our goal: predictable cooling you can scale with confidence.

Operations, Monitoring & Maintenance

Reliability is a process. We offer tailored service agreements to maintain uptime and protect your warranty and asset life.

• 24/7 on‑call support and guaranteed response windows
• Sensors, trend analysis, and leak detection integration
• Filter changes, coil cleaning, refrigerant management
• Vibration analysis, electrical inspections, and firmware updates
• Seasonal performance tuning to maintain design delta‑T

We align PMs with your maintenance windows and provide after‑action reports. If an incident occurs, we accelerate root‑cause analysis and mitigation to restore stability fast.

Equipment & Sourcing (Including AC PRO Options)

We configure solutions that meet your standards and procurement preferences. Our engineers are factory‑trained by Fujitsu (Japan), Mitsubishi Electric (Thailand), Midea (China), Gree (China), and Haier (China), bringing manufacturer‑level insight to deployment and service. When project specifications allow, we can source equipment and parts through AC PRO channels to streamline logistics and lead times.

• Precision cooling units (CRAC/CRAH), perimeter and in‑row options
• Heat rejection: dry coolers, fluid coolers, cooling towers
• Controls/BMS integration and DCIM data flows
• Airflow management: blanking, brush grommets, containment
• Liquid cooling readiness for future high‑density loads

We design around your Tier objectives and budget, balancing efficiency with reliability to reduce PUE without compromising redundancy.

Industries & Facilities We Serve

From enterprise IT rooms to edge sites, our commercial team supports a wide range of environments across Calabasas and neighboring cities.

• Enterprise and colocation data centers
• Broadcast/media and post‑production suites
• Finance, healthcare, and research compute rooms
• Campus IDFs/MDFs and server closets
• Public sector, education, and smart buildings

Whether you are consolidating, expanding, or modernizing for higher rack densities, we can help you sequence the work with zero‑surprise execution.

Calabasas & Greater Service Area

Based in Los Angeles, we proudly serve Calabasas and Los Angeles County, with fast response to nearby regions: Orange County, Ventura County, and Western Riverside County. Local coverage includes Agoura Hills, Hidden Hills, Woodland Hills, Westlake Village, Thousand Oaks, Encino, and more.

We understand local codes, permitting timelines, and utility programs — and we leverage that knowledge to keep your timeline on track and your incentives optimized.

Start Your Project

Ready to improve uptime, lower PUE, or plan capacity for growth? Contact #1 AC Guys for a consultative walkthrough and a right‑sized proposal. We will assess your current environment, identify quick wins, and outline a roadmap for long‑term reliability.

Call now for 24/7 support or to schedule a site visit in Calabasas. When the stakes are high, trust the fourth‑generation engineers at #1 AC Guys to keep your data center cool, efficient, and always on.