Commercial & Industrial Exhaust Systems in Fontana — Amana Integration

Why Fontana Chooses #1 AC Guys

We are a family business built by engineers—now in our 4th generation—with 80+ years of engineering expertise. That depth shows up in safer designs, tighter commissioning, and systems that work in the real world. Our mission is simple: healthier air for healthier lives, delivered with commercial‑grade reliability.

• Complex projects made simple: design‑build or plans/spec with full documentation
• Code‑driven engineering: IMC, NFPA 96, Title 24, CALGreen, and SCAQMD considerations baked in
• Integration with Amana HVAC equipment for dependable make‑up air, RTUs, and controls
• Precise air balancing for comfort, pressurization, and contaminant control
• Fast, professional installation with clean workmanship and safety first

What We Design and Install

• Commercial kitchen exhaust: UL‑listed hoods, welded grease duct, grease exhaust fans, rooftop curbs
• Make‑up air systems: direct‑fired/indirect‑fired, tempered MAU, energy recovery where appropriate
• Industrial fume and dust extraction: source capture, cartridge collectors, high‑plume exhaust
• General ventilation: warehouses, distribution centers, production floors, print shops
• Parking garage ventilation: demand control using CO/NO2 sensors, VFDs, EC fans
• Laboratory and process exhaust: corrosion‑resistant materials, stack design for safe dispersion
• Smoke and heat exhaust, stair pressurization interfacing with building life‑safety systems

Every system is tailored to your process loads, contaminants, duty cycles, and maintenance goals—built for quiet, efficient, long‑life operation.

Amana HVAC Integration

Many Fontana facilities run Amana rooftop units (RTUs) or split systems for comfort cooling and heating. We design exhaust and make‑up air that integrate cleanly with Amana equipment to maintain neutral building pressure, stabilize temperatures, and reduce energy waste. Typical sequences include demand ventilation, economizer coordination, and supply fan tracking of exhaust volumes via VFDs. We also coordinate controls (e.g., BACnet/Modbus gateways where applicable) so operators get a single, simple interface.

Important note: we are experienced working with Amana equipment and integrations. Our factory training comes from Fujitsu (Japan), Mitsubishi Electric (Thailand), Midea (China), Gree (China), and Haier (China), helping us engineer robust, field‑ready solutions.

Our Process

• Site assessment and airflow study: capture sources, volumes, discharge requirements, and constraints
• Engineering and code review: NFPA 96, IMC, Title 24/CALGreen, local amendments, SCAQMD
• System design: hoods/hood placement, duct routing, fan selection, MAU sizing, controls logic
• Permits and submittals: stamped drawings as required, equipment schedules, O&M documentation
• Installation: safety compliance, meticulous ductwork, curb/gasketing details, seismic bracing
• Commissioning and test & balance: airflow verification, pressure tuning, controls sequencing
• Training and maintenance: filter/grease management plans, performance checks, on‑call support

Compliance and Best Practices

Our exhaust systems are engineered with compliance in mind from day one. We address key standards including IMC, NFPA 96 for commercial kitchens, California Title 24 for energy, CALGreen for sustainability, and SCAQMD guidance on emissions and permitting. Where needed, we deploy double‑wall insulated grease duct, spark‑resistant fans, backdraft protection, and fire‑rated enclosures. Controls can include VOC/PM sensors, CO and NO2 for garages, and demand‑based modulation to reduce kWh and improve IAQ.

Industries We Serve in Fontana

• Food service and commissary kitchens
• Warehousing and distribution
• Manufacturing and light industrial
• Automotive and body shops
• Laboratories and R&D spaces
• Printing and finishing

Whether you need a single fan replacement or a multi‑zone system with energy recovery and advanced controls, we bring the same engineering discipline to every job.

Service, Repairs, and Maintenance

We protect your investment with proactive service plans: bearing and belt inspections, vibration checks, filter and grease management, airflow verification, and controls tuning. Emergency response is available to get you back online fast—because downtime costs more than maintenance ever will.

Service Area

We are based in Los Angeles and proudly serve Fontana and nearby Inland Empire locations, as well as Los Angeles County, Orange County, Ventura County, and Western Riverside County. If your project sits on the edge of these areas, ask us—we often accommodate adjacent sites for critical commercial timelines.

Get Your Exhaust Project Moving

Bring us your toughest challenge. As 4th‑generation engineers with 80+ years of engineering expertise, #1 AC Guys delivers commercial and industrial exhaust systems that are safer, quieter, and easier to run. Tell us about your Fontana facility, and we’ll provide a clear plan, a clean install, and performance you can measure.