Commercial Sensor Calibration in Burbank

Accurate sensors are the foundation of dependable commercial HVAC control. In Burbank’s fast‑moving business environment—production studios, offices, medical suites, and retail—your BAS/BMS can only perform as well as the signals it receives. #1 AC Guys calibrates, verifies, and documents those signals so your equipment and control sequences make the right decisions every time.

What we calibrate

• Temperature sensors and RTD/thermistors on AHUs, RTUs, VAVs, VRF, and hydronic loops
• Relative humidity sensors for IAQ control and comfort
• CO2 sensors for demand‑controlled ventilation (DCV) and Title 24 strategies
• Airflow stations and velocity pressure pickups for AHUs, VAV boxes, and exhaust systems
• Static and differential pressure transducers across filters, coils, and ducts
• Refrigerant and hydronic pressure/temperature sensors for chillers, boilers, and heat pumps
• Economizer and outdoor air sensors (dry‑bulb/enthalpy)
• Damper/valve position feedback and actuators
• Occupancy sensors and VOC sensors tied into BAS/BMS

Our engineers are experienced with commercial control platforms and sequences of operation common across Los Angeles County. We align field readings with controller inputs and reset strategies so your setpoints translate into real‑world performance.

Our calibration process

• Assessment: Review drawings, points lists, and sequences of operation; identify drift‑sensitive devices and high‑impact zones.
• Field testing: Compare sensor output to reference instruments at multiple points across expected operating ranges.
• Adjustment: Calibrate or offset sensors within manufacturer tolerances; correct wiring, location, or averaging issues as needed.
• Controls verification: Validate BAS/BMS scaling, alarming, and trend logs; confirm setpoint tracking and damper/valve response.
• Functional checks: Prove economizer logic, DCV, VAV flow control, and coil performance under typical loads.
• Documentation: Provide a calibration report with as‑found/as‑left data, recommended repairs, and optimization opportunities.

Because we are factory‑trained by Fujitsu (Japan), Mitsubishi Electric (Thailand), Midea (China), Gree (China), and Haier (China), our team is fluent in the details that matter on today’s VRF and advanced commercial systems.

Why calibration matters in Burbank

Even small sensor errors compound across a building. A 2°F temperature bias can trigger unnecessary reheat, a mis‑scaled airflow station can cause chronic comfort complaints, and a drifting CO2 sensor can over‑ventilate and waste energy. Precise calibration helps:

• Stabilize comfort and reduce hot/cold calls
• Enhance indoor air quality for healthier spaces
• Lower energy use by preventing simultaneous heating/cooling
• Protect equipment with accurate safeties and alarms
• Support California Title 24, energy benchmarking, and ASHRAE guidance

For many Burbank facilities, annual calibration tied to filter changes or seasonal commissioning keeps systems on target and budgets predictable.

Industries we serve

• Studios and post‑production environments
• Corporate offices and multi‑tenant buildings
• Healthcare clinics and labs
• Retail and restaurants
• Educational and municipal facilities
• Industrial and light manufacturing

We specialize in large, complex projects where precise control pays real dividends. Whether you run a single building in Burbank or a portfolio across Los Angeles County, our team scales to your needs.

Deliverables you can use

• Calibration certificates with device locations, ranges, and tolerances
• Updated BAS points lists and scaling notes
• Trend snapshots that demonstrate before/after stability
• Repair and optimization recommendations with prioritized ROI

These records support your maintenance planning, audit readiness, and communication with ownership or tenants.

Optimization opportunities we often find

• Re‑locating sensors away from heat sources, sunlight, or poor airflow
• Correcting damper/valve stroke and end‑switch feedback
• Fixing mis‑applied outdoor air sensors that undermine economizer logic
• Adjusting VAV minimums to match real airflow station readings
• Re‑tuning DCV setpoints based on verified CO2 accuracy

Our mission is healthy air for a healthy life. Accurate sensing is the first step to cleaner, safer, and more efficient buildings.

Service area and response

Based in Los Angeles, #1 AC Guys serves Burbank and the wider region: Los Angeles County and nearby Orange County, Ventura County, and Western Riverside County. We plan work to minimize downtime and coordinate with your operations, production schedules, or tenant needs.

Why #1 AC Guys

• Fourth‑generation family of engineers with 80+ years in engineering
• Factory‑trained by Fujitsu (Japan), Mitsubishi Electric (Thailand), Midea (China), Gree (China), and Haier (China)
• Commercial focus with deep experience in BAS/BMS and complex controls
• Clear communication, actionable reporting, and a problem‑solving mindset

If your building has recurring comfort issues, unstable trends, or frequent nuisance alarms, it is likely time for a calibration sweep. We can start with a targeted audit of critical zones and expand as needed.

Get started

Request a site visit for Commercial Sensor Calibration in Burbank. We will review your goals, sequences of operation, and current pain points, then provide a clear scope and schedule. Put #1 AC Guys to work and restore confidence in the data that runs your building.

Call now or send your BAS points list to our team, and let our engineering lineage bring precision back to your facility.